Our Custom line is the outcome of wanting to provide a "day boat" type option to the market.  A more traditional layout but with all of the benefits of our Semifly and larger boat hull designs.  The main difference of our Custom range is that they are more directed at boaters who mainly day boat and occasionally over night, rather than the live aboard option our Semifly range offers.  The look and overall finish will never be compromised, however, we are also able to finish these in bare alluminum.

From 7.5 Meters through to 10 Meters we have a great starting point for most boaters.  Just add your layout, features and water! 

Alternatively, if we do not have what you are looking we have full design and build capabilities for pleasure or commercial vessels.  Contact us with your requirements. 

 

Custom 750

This is a 7.5 meter bare alloy trailer boat with a 2.5 metre beam.  It carries a 20 degree dead rise and has turn down chines.   Its keel is a 6mm doubler plate that floods at rest providing incredible stability and a secondary hull skin the length of the boat.  The bow stem is made up of a 100mm vertical keel bar and 5mm hull plate with the 6mm doubler plates on top (11mm plate in total plus keel bar).  This boat was acid washed then clear coated as a finish.  It has a manual head, v berth with infill, twin king/queen seats and set up for game fishing.  This is also offered as a inboard version.  Please contact us for more information

 

Custom 800

This was commissioned from the Custom 750 model and has the same hull design.  The extra length is to accommodate an inboard diesel engine whilst retaining the same cockpit space.  This boat is finished to the Dickey Boats high-quality painted standard with tek decks and quality stainless steel fixtures and fittings.  The forward cabin can be locked with a sliding bulkhead door and offers a v berth with infill and head.  In the cockpit there is two king and queen seats built into the boat and the engine cover has been configured with a custom cutting board, single burner cooker and sink with shower head. The aft end of the engine cover is a rear facing seat on the swim platform.  Please contact us for more information.

 

Custom 900

After a lot of requests for a “day boat” type option of our Award Winning Semifly 28 hull, we now have concept drawings for Dickey Boats new Custom 900. This model can still be trailered and is the proven Semifly 28 hull with a change in layout and wheel house design.    We have created more cockpit and saloon space through condensing fwd cabin volume and removing the semiflybridge. We gain a larger seating arrangement in the saloon/helm area. This is a hard top with lockable bulkhead as an option (the same bifolds as the 32). The galley has been opened up to the Saloon/helm area by removing the dash on the port side.  The Custom 900 better suits those boaters who mainly day boat and on occasion overnight, rather than the live aboard option our Semifly 28 offers.  With its large dimentions and 2.8 meter beam this boat could be moored comfortably.  There are a number of layout possabilities.

 

Custom 1000

The Custom 1000 is based on our award winning Custom 900 hull design.  The fwd cabin can be configured in a number of ways, but the current design boasts a bedroom with a full time double bed below and 2 single bunks above.  This bed room can be curtained off from the rest of the boat. The galley flows to the saloon via the open dash and saloon flows to the cockpit via bifolding door and window .  The main saloon has the helm and storage cabinet with large fridge to stbd and a 3 seater facing fwd and 2 seater facing aft with a large table in the middle (table can drop to another double). This is a LOA 10 meter boat (fits in 10 meter mooring!) with a 3 meter beam.  It utilises more exterior space for primarily day boating but with the ability to sleep the family.  If you are in the market for a 10 meter boat this has to be on your list!

 

Center Console

All of our Custom models are available as a center console option, open or enclosed hard top configuration.  The Custom 800 center console to the left has a fixed helm seat and 3 flip up seats in the hard top.  It has a bunk and head below.  With a gunnel height above 720mm walking all the way around and 1 step up to the bow it is a true walk around.